Interactive Exams

Test your knowledge with our interactive exams, designed to help you prepare for assessments and gain confidence in your skills.

Select your course:

Technology - Paper 1

Technology - Paper 1

1 / 40

1. To feed a 400v motor the voltage Stepped down from the sub-station would be...

2 / 40

2. Which one is not a Transmission voltage?

3 / 40

3. Which is the worst way of using Harvested Rainwater?

4 / 40

4. What is Grey water best used for?

5 / 40

5. A Micro-wind turbine swept area is no more than (max 2.2m blades).

6 / 40

6. What Fossil fuel is used to produce steam?

7 / 40

7. Which is the best location for wind turbines?

8 / 40

8. Which one doesn’t need Fossil fuel to produce steam?

9 / 40

9. Which one of the following is the main fuel for Biomass?

10 / 40

10. Name the Earthing system in the picture.

11 / 40

11. Name the Earthing System in the picture.

12 / 40

12. Name the Earthing System in the picture.

13 / 40

13. What type of Earthing systems is this?

14 / 40

14. What type of Earthing Systems is this?

15 / 40

15. What type of Earthing Systems is this?

16 / 40

16. The Earth return path within the suppliers cable of a TN-C-S System is the...

17 / 40

17. Name the following fixing…

18 / 40

18. Which correction factor is used for Grouping of cables?

19 / 40

19. Which protective device would protect against Overload and Earth Fault protection?

20 / 40

20. Which protective device would not protect against Overload protection?

21 / 40

21. Why is a copper link used when joining two pieces of Steel trunking?

22 / 40

22. What type of conduit would be used as a cpc?

23 / 40

23. Which protective device would protect against Earth Fault protection?

24 / 40

24. What would be a cheap way of installing an SWA 4 core cable to a Distribution board?

25 / 40

25. Which DATA cable would be used if there are lots of computers in use?

26 / 40

26. What would be the minimum size of trunking for single core 70º thermoplastic insulation cables: 10 x 4mm², 10 x 4mm², 10 x 10mm².

27 / 40

27. What is the minimum conduit size for a straight run containing the following single core thermoplastic insulation cables, 2 x 1.5mm2, 3 x 2.5mm2 and 3 x 4mm2.

28 / 40

28. What is the symbol shown below?

29 / 40

29. What is the symbol shown below?

30 / 40

30. If Band 1 and Band 2 circuits are in the same trunking they must be…

31 / 40

31. What would be the voltage drop for a two-core 2.5mm2 700Thermoplastic insulated and sheathed flat cable feeding a load of 18A and the length is 22m?

32 / 40

32. What is EWR used for?

33 / 40

33. Which one of the following is a Statutory document?

34 / 40

34. What document would list lighting, fittings, type and size of cables?

35 / 40

35. When using tools and electrical equipment what regulations would cover these?

36 / 40

36. Which one of these defines a metal radiator which is fixed to a wall?

37 / 40

37. Which one of these defines a metal conduit which is fixed to a wall where it drops down to a light switch?

38 / 40

38. Which one of the following is the most common material used for cables suspended by pylons used for transmission systems?

39 / 40

39. what is the maximum length of span for cables between buildings with no intermediate support?

40 / 40

40. what is the minimum internal radii factor for cable bends if the cable has less than 10mm diameter?

Your score is

The average score is 73%

Feeling a little rusty and need a refresher?

Our short courses, with help you feel confident and prepared for your next assessment.